byp4a55 professor6T9

Linux premium133.web-hosting.com 4.18.0-553.44.1.lve.el8.x86_64 #1 SMP Thu Mar 13 14:29:12 UTC 2025 x86_64
LiteSpeed
162.0.232.69

heapq.py

"""Heap queue algorithm (a.k.a. priority queue).

Heaps are arrays for which a[k] <= a[2*k+1] and a[k] <= a[2*k+2] for
all k, counting elements from 0.  For the sake of comparison,
non-existing elements are considered to be infinite.  The interesting
property of a heap is that a[0] is always its smallest element.

Usage:

heap = []            # creates an empty heap
heappush(heap, item) # pushes a new item on the heap
item = heappop(heap) # pops the smallest item from the heap
item = heap[0]       # smallest item on the heap without popping it
heapify(x)           # transforms list into a heap, in-place, in linear time
item = heapreplace(heap, item) # pops and returns smallest item, and adds
                               # new item; the heap size is unchanged

Our API differs from textbook heap algorithms as follows:

- We use 0-based indexing.  This makes the relationship between the
  index for a node and the indexes for its children slightly less
  obvious, but is more suitable since Python uses 0-based indexing.

- Our heappop() method returns the smallest item, not the largest.

These two make it possible to view the heap as a regular Python list
without surprises: heap[0] is the smallest item, and heap.sort()
maintains the heap invariant!
"""

# Original code by Kevin O'Connor, augmented by Tim Peters and Raymond Hettinger

__about__ = """Heap queues

[explanation by François Pinard]

The strange invariant above is meant to be an efficient memory
representation for a tournament.  The numbers below are `k', not a[k]:

1                                 2

3               4                5               6

7       8       9       10      11      12      13      14

15 16   17 18   19 20   21 22   23 24   25 26   27 28   29 30

In the tree above, each cell `k' is topping `2*k+1' and `2*k+2'.  In
an usual binary tournament we see in sports, each cell is the winner
over the two cells it tops, and we can trace the winner down the tree
to see all opponents s/he had.  However, in many computer applications
of such tournaments, we do not need to trace the history of a winner.
To be more memory efficient, when a winner is promoted, we try to
replace it by something else at a lower level, and the rule becomes
that a cell and the two cells it tops contain three different items,
but the top cell "wins" over the two topped cells.

If this heap invariant is protected at all time, index 0 is clearly
the overall winner.  The simplest algorithmic way to remove it and
find the "next" winner is to move some loser (let's say cell 30 in the
diagram above) into the 0 position, and then percolate this new 0 down
the tree, exchanging values, until the invariant is re-established.
This is clearly logarithmic on the total number of items in the tree.
By iterating over all items, you get an O(n ln n) sort.

A nice feature of this sort is that you can efficiently insert new
items while the sort is going on, provided that the inserted items are
not "better" than the last 0'th element you extracted.  This is
especially useful in simulation contexts, where the tree holds all
incoming events, and the "win" condition means the smallest scheduled
time.  When an event schedule other events for execution, they are
scheduled into the future, so they can easily go into the heap.  So, a
heap is a good structure for implementing schedulers (this is what I
used for my MIDI sequencer :-).

Various structures for implementing schedulers have been extensively
studied, and heaps are good for this, as they are reasonably speedy,
the speed is almost constant, and the worst case is not much different
than the average case.  However, there are other representations which
are more efficient overall, yet the worst cases might be terrible.

Heaps are also very useful in big disk sorts.  You most probably all
know that a big sort implies producing "runs" (which are pre-sorted
sequences, which size is usually related to the amount of CPU memory),
followed by a merging passes for these runs, which merging is often
very cleverly organised[1].  It is very important that the initial
sort produces the longest runs possible.  Tournaments are a good way
to that.  If, using all the memory available to hold a tournament, you
replace and percolate items that happen to fit the current run, you'll
produce runs which are twice the size of the memory for random input,
and much better for input fuzzily ordered.

Moreover, if you output the 0'th item on disk and get an input which
may not fit in the current tournament (because the value "wins" over
the last output value), it cannot fit in the heap, so the size of the
heap decreases.  The freed memory could be cleverly reused immediately
for progressively building a second heap, which grows at exactly the
same rate the first heap is melting.  When the first heap completely
vanishes, you switch heaps and start a new run.  Clever and quite
effective!

In a word, heaps are useful memory structures to know.  I use them in
a few applications, and I think it is good to keep a `heap' module
around. :-)

--------------------
[1] The disk balancing algorithms which are current, nowadays, are
more annoying than clever, and this is a consequence of the seeking
capabilities of the disks.  On devices which cannot seek, like big
tape drives, the story was quite different, and one had to be very
clever to ensure (far in advance) that each tape movement will be the
most effective possible (that is, will best participate at
"progressing" the merge).  Some tapes were even able to read
backwards, and this was also used to avoid the rewinding time.
Believe me, real good tape sorts were quite spectacular to watch!
From all times, sorting has always been a Great Art! :-)
"""

__all__ = ['heappush', 'heappop', 'heapify', 'heapreplace', 'merge',
           'nlargest', 'nsmallest', 'heappushpop']

from itertools import islice, count, tee, chain

def heappush(heap, item):
    """Push item onto heap, maintaining the heap invariant."""
    heap.append(item)
    _siftdown(heap, 0, len(heap)-1)

def heappop(heap):
    """Pop the smallest item off the heap, maintaining the heap invariant."""
    lastelt = heap.pop()    # raises appropriate IndexError if heap is empty
    if heap:
        returnitem = heap[0]
        heap[0] = lastelt
        _siftup(heap, 0)
    else:
        returnitem = lastelt
    return returnitem

def heapreplace(heap, item):
    """Pop and return the current smallest value, and add the new item.

This is more efficient than heappop() followed by heappush(), and can be
    more appropriate when using a fixed-size heap.  Note that the value
    returned may be larger than item!  That constrains reasonable uses of
    this routine unless written as part of a conditional replacement:

if item > heap[0]:
            item = heapreplace(heap, item)
    """
    returnitem = heap[0]    # raises appropriate IndexError if heap is empty
    heap[0] = item
    _siftup(heap, 0)
    return returnitem

def heappushpop(heap, item):
    """Fast version of a heappush followed by a heappop."""
    if heap and heap[0] < item:
        item, heap[0] = heap[0], item
        _siftup(heap, 0)
    return item

def heapify(x):
    """Transform list into a heap, in-place, in O(len(x)) time."""
    n = len(x)
    # Transform bottom-up.  The largest index there's any point to looking at
    # is the largest with a child index in-range, so must have 2*i + 1 < n,
    # or i < (n-1)/2.  If n is even = 2*j, this is (2*j-1)/2 = j-1/2 so
    # j-1 is the largest, which is n//2 - 1.  If n is odd = 2*j+1, this is
    # (2*j+1-1)/2 = j so j-1 is the largest, and that's again n//2-1.
    for i in reversed(range(n//2)):
        _siftup(x, i)

def _heappushpop_max(heap, item):
    """Maxheap version of a heappush followed by a heappop."""
    if heap and item < heap[0]:
        item, heap[0] = heap[0], item
        _siftup_max(heap, 0)
    return item

def _heapify_max(x):
    """Transform list into a maxheap, in-place, in O(len(x)) time."""
    n = len(x)
    for i in reversed(range(n//2)):
        _siftup_max(x, i)

def nlargest(n, iterable):
    """Find the n largest elements in a dataset.

Equivalent to:  sorted(iterable, reverse=True)[:n]
    """
    if n < 0:
        return []
    it = iter(iterable)
    result = list(islice(it, n))
    if not result:
        return result
    heapify(result)
    _heappushpop = heappushpop
    for elem in it:
        _heappushpop(result, elem)
    result.sort(reverse=True)
    return result

def nsmallest(n, iterable):
    """Find the n smallest elements in a dataset.

Equivalent to:  sorted(iterable)[:n]
    """
    if n < 0:
        return []
    it = iter(iterable)
    result = list(islice(it, n))
    if not result:
        return result
    _heapify_max(result)
    _heappushpop = _heappushpop_max
    for elem in it:
        _heappushpop(result, elem)
    result.sort()
    return result

# 'heap' is a heap at all indices >= startpos, except possibly for pos.  pos
# is the index of a leaf with a possibly out-of-order value.  Restore the
# heap invariant.
def _siftdown(heap, startpos, pos):
    newitem = heap[pos]
    # Follow the path to the root, moving parents down until finding a place
    # newitem fits.
    while pos > startpos:
        parentpos = (pos - 1) >> 1
        parent = heap[parentpos]
        if newitem < parent:
            heap[pos] = parent
            pos = parentpos
            continue
        break
    heap[pos] = newitem

# The child indices of heap index pos are already heaps, and we want to make
# a heap at index pos too.  We do this by bubbling the smaller child of
# pos up (and so on with that child's children, etc) until hitting a leaf,
# then using _siftdown to move the oddball originally at index pos into place.
#
# We *could* break out of the loop as soon as we find a pos where newitem <=
# both its children, but turns out that's not a good idea, and despite that
# many books write the algorithm that way.  During a heap pop, the last array
# element is sifted in, and that tends to be large, so that comparing it
# against values starting from the root usually doesn't pay (= usually doesn't
# get us out of the loop early).  See Knuth, Volume 3, where this is
# explained and quantified in an exercise.
#
# Cutting the # of comparisons is important, since these routines have no
# way to extract "the priority" from an array element, so that intelligence
# is likely to be hiding in custom comparison methods, or in array elements
# storing (priority, record) tuples.  Comparisons are thus potentially
# expensive.
#
# On random arrays of length 1000, making this change cut the number of
# comparisons made by heapify() a little, and those made by exhaustive
# heappop() a lot, in accord with theory.  Here are typical results from 3
# runs (3 just to demonstrate how small the variance is):
#
# Compares needed by heapify     Compares needed by 1000 heappops
# --------------------------     --------------------------------
# 1837 cut to 1663               14996 cut to 8680
# 1855 cut to 1659               14966 cut to 8678
# 1847 cut to 1660               15024 cut to 8703
#
# Building the heap by using heappush() 1000 times instead required
# 2198, 2148, and 2219 compares:  heapify() is more efficient, when
# you can use it.
#
# The total compares needed by list.sort() on the same lists were 8627,
# 8627, and 8632 (this should be compared to the sum of heapify() and
# heappop() compares):  list.sort() is (unsurprisingly!) more efficient
# for sorting.

def _siftup(heap, pos):
    endpos = len(heap)
    startpos = pos
    newitem = heap[pos]
    # Bubble up the smaller child until hitting a leaf.
    childpos = 2*pos + 1    # leftmost child position
    while childpos < endpos:
        # Set childpos to index of smaller child.
        rightpos = childpos + 1
        if rightpos < endpos and not heap[childpos] < heap[rightpos]:
            childpos = rightpos
        # Move the smaller child up.
        heap[pos] = heap[childpos]
        pos = childpos
        childpos = 2*pos + 1
    # The leaf at pos is empty now.  Put newitem there, and bubble it up
    # to its final resting place (by sifting its parents down).
    heap[pos] = newitem
    _siftdown(heap, startpos, pos)

def _siftdown_max(heap, startpos, pos):
    'Maxheap variant of _siftdown'
    newitem = heap[pos]
    # Follow the path to the root, moving parents down until finding a place
    # newitem fits.
    while pos > startpos:
        parentpos = (pos - 1) >> 1
        parent = heap[parentpos]
        if parent < newitem:
            heap[pos] = parent
            pos = parentpos
            continue
        break
    heap[pos] = newitem

def _siftup_max(heap, pos):
    'Maxheap variant of _siftup'
    endpos = len(heap)
    startpos = pos
    newitem = heap[pos]
    # Bubble up the larger child until hitting a leaf.
    childpos = 2*pos + 1    # leftmost child position
    while childpos < endpos:
        # Set childpos to index of larger child.
        rightpos = childpos + 1
        if rightpos < endpos and not heap[rightpos] < heap[childpos]:
            childpos = rightpos
        # Move the larger child up.
        heap[pos] = heap[childpos]
        pos = childpos
        childpos = 2*pos + 1
    # The leaf at pos is empty now.  Put newitem there, and bubble it up
    # to its final resting place (by sifting its parents down).
    heap[pos] = newitem
    _siftdown_max(heap, startpos, pos)

# If available, use C implementation
try:
    from _heapq import *
except ImportError:
    pass

def merge(*iterables):
    '''Merge multiple sorted inputs into a single sorted output.

Similar to sorted(itertools.chain(*iterables)) but returns a generator,
    does not pull the data into memory all at once, and assumes that each of
    the input streams is already sorted (smallest to largest).

>>> list(merge([1,3,5,7], [0,2,4,8], [5,10,15,20], [], [25]))
    [0, 1, 2, 3, 4, 5, 5, 7, 8, 10, 15, 20, 25]

'''
    _heappop, _heapreplace, _StopIteration = heappop, heapreplace, StopIteration
    _len = len

h = []
    h_append = h.append
    for itnum, it in enumerate(map(iter, iterables)):
        try:
            next = it.__next__
            h_append([next(), itnum, next])
        except _StopIteration:
            pass
    heapify(h)

while _len(h) > 1:
        try:
            while True:
                v, itnum, next = s = h[0]
                yield v
                s[0] = next()               # raises StopIteration when exhausted
                _heapreplace(h, s)          # restore heap condition
        except _StopIteration:
            _heappop(h)                     # remove empty iterator
    if h:
        # fast case when only a single iterator remains
        v, itnum, next = h[0]
        yield v
        yield from next.__self__

# Extend the implementations of nsmallest and nlargest to use a key= argument
_nsmallest = nsmallest
def nsmallest(n, iterable, key=None):
    """Find the n smallest elements in a dataset.

Equivalent to:  sorted(iterable, key=key)[:n]
    """
    # Short-cut for n==1 is to use min() when len(iterable)>0
    if n == 1:
        it = iter(iterable)
        head = list(islice(it, 1))
        if not head:
            return []
        if key is None:
            return [min(chain(head, it))]
        return [min(chain(head, it), key=key)]

# When n>=size, it's faster to use sorted()
    try:
        size = len(iterable)
    except (TypeError, AttributeError):
        pass
    else:
        if n >= size:
            return sorted(iterable, key=key)[:n]

# When key is none, use simpler decoration
    if key is None:
        it = zip(iterable, count())                         # decorate
        result = _nsmallest(n, it)
        return [r[0] for r in result]                       # undecorate

# General case, slowest method
    in1, in2 = tee(iterable)
    it = zip(map(key, in1), count(), in2)                   # decorate
    result = _nsmallest(n, it)
    return [r[2] for r in result]                           # undecorate

_nlargest = nlargest
def nlargest(n, iterable, key=None):
    """Find the n largest elements in a dataset.

Equivalent to:  sorted(iterable, key=key, reverse=True)[:n]
    """

# Short-cut for n==1 is to use max() when len(iterable)>0
    if n == 1:
        it = iter(iterable)
        head = list(islice(it, 1))
        if not head:
            return []
        if key is None:
            return [max(chain(head, it))]
        return [max(chain(head, it), key=key)]

# When n>=size, it's faster to use sorted()
    try:
        size = len(iterable)
    except (TypeError, AttributeError):
        pass
    else:
        if n >= size:
            return sorted(iterable, key=key, reverse=True)[:n]

# When key is none, use simpler decoration
    if key is None:
        it = zip(iterable, count(0,-1))                     # decorate
        result = _nlargest(n, it)
        return [r[0] for r in result]                       # undecorate

# General case, slowest method
    in1, in2 = tee(iterable)
    it = zip(map(key, in1), count(0,-1), in2)               # decorate
    result = _nlargest(n, it)
    return [r[2] for r in result]                           # undecorate

if __name__ == "__main__":
    # Simple sanity test
    heap = []
    data = [1, 3, 5, 7, 9, 2, 4, 6, 8, 0]
    for item in data:
        heappush(heap, item)
    sort = []
    while heap:
        sort.append(heappop(heap))
    print(sort)

import doctest
    doctest.testmod()

Name	Type	Size	Owner/Group	Permission	Last Modified	Actions
.	dir	-	root/linksafe	0755	2024-05-24 06:33:21
..	dir	-	root/root	0755	2024-05-24 06:36:20
__pycache__	dir	-	root/linksafe	0755	2024-05-24 06:33:21
asyncio	dir	-	root/linksafe	0755	2024-05-24 06:33:21
collections	dir	-	root/linksafe	0755	2024-05-24 06:33:21
concurrent	dir	-	root/linksafe	0755	2024-05-24 06:33:21
config-3.4m	dir	-	root/linksafe	0755	2024-05-24 06:36:20
ctypes	dir	-	root/linksafe	0755	2024-05-24 06:33:21
curses	dir	-	root/linksafe	0755	2024-05-24 06:33:21
dbm	dir	-	root/linksafe	0755	2024-05-24 06:33:21
distutils	dir	-	root/linksafe	0755	2024-05-24 06:33:21
email	dir	-	root/linksafe	0755	2024-05-24 06:33:21
encodings	dir	-	root/linksafe	0755	2024-05-24 06:33:21
ensurepip	dir	-	root/linksafe	0755	2024-05-24 06:33:21
html	dir	-	root/linksafe	0755	2024-05-24 06:33:21
http	dir	-	root/linksafe	0755	2024-05-24 06:33:21
idlelib	dir	-	root/linksafe	0755	2024-05-24 06:33:21
importlib	dir	-	root/linksafe	0755	2024-05-24 06:33:21
json	dir	-	root/linksafe	0755	2024-05-24 06:33:21
lib-dynload	dir	-	root/linksafe	0755	2024-05-24 06:33:21
lib2to3	dir	-	root/linksafe	0755	2024-05-24 06:33:21
logging	dir	-	root/linksafe	0755	2024-05-24 06:33:21
multiprocessing	dir	-	root/linksafe	0755	2024-05-24 06:33:21
plat-linux	dir	-	root/linksafe	0755	2024-05-24 06:33:21
pydoc_data	dir	-	root/linksafe	0755	2024-05-24 06:33:21
site-packages	dir	-	root/linksafe	0755	2024-05-24 06:33:21
sqlite3	dir	-	root/linksafe	0755	2024-05-24 06:33:21
test	dir	-	root/linksafe	0755	2024-05-24 06:33:21
unittest	dir	-	root/linksafe	0755	2024-05-24 06:33:21
urllib	dir	-	root/linksafe	0755	2024-05-24 06:33:21
venv	dir	-	root/linksafe	0755	2024-05-24 06:33:21
wsgiref	dir	-	root/linksafe	0755	2024-05-24 06:33:21
xml	dir	-	root/linksafe	0755	2024-05-24 06:33:21
xmlrpc	dir	-	root/linksafe	0755	2024-05-24 06:33:21
__future__.py	text/plain	4.48 KB	root/linksafe	0644	2024-04-17 05:10:02
__phello__.foo.py	text/plain	64 B	root/linksafe	0644	2024-04-17 05:10:01
_bootlocale.py	text/plain	1.27 KB	root/linksafe	0644	2024-04-17 05:09:57
_collections_abc.py	text/x-script.python	19.43 KB	root/linksafe	0644	2024-04-17 05:09:57
_compat_pickle.py	text/plain	8.12 KB	root/linksafe	0644	2024-04-17 05:10:00
_dummy_thread.py	text/plain	4.76 KB	root/linksafe	0644	2024-04-17 05:10:01
_markupbase.py	text/plain	14.26 KB	root/linksafe	0644	2024-04-17 05:09:57
_osx_support.py	text/plain	18.65 KB	root/linksafe	0644	2024-04-17 05:10:01
_pyio.py	text/plain	72.16 KB	root/linksafe	0644	2024-04-17 05:09:58
_sitebuiltins.py	text/plain	3.04 KB	root/linksafe	0644	2024-04-17 05:09:58
_strptime.py	text/plain	21.54 KB	root/linksafe	0644	2024-04-17 05:10:02
_sysconfigdata.py	text/plain	28.05 KB	root/linksafe	0644	2024-04-17 05:10:01
_threading_local.py	text/plain	7.24 KB	root/linksafe	0644	2024-04-17 05:09:57
_weakrefset.py	text/x-script.python	5.57 KB	root/linksafe	0644	2024-04-17 05:09:57
abc.py	text/x-script.python	8.42 KB	root/linksafe	0644	2024-04-17 05:09:57

Team Anon Force

https://t.me/Professor6T9x